Product List
The traditional wood des making usually need to be drawn manually on the die board with a pencilor pen and then cut the linesmanauly or with a sowing machine and then loaded with steel rules. This way is extremely nefficient With Aolang laser die cuttingmachine, you only need to make CAD drawing and the machine willfinish the cutting of the die board automatically.?
|
|
600W High Efficiency CO2 Laser Power Supply 110V/220V for Laser Engraving Cutting Machine600W CO₂ Laser Power Supply for Laser Cutting and Engraving Machine, Stable High Voltage Industrial Laser Driver.
收藏
Description
Notes: 1. The laser tube must be cooled by water during operation! 2. The high-voltage output terminal must not be open-circuited! (The positive and negative ends of the high-voltage output must be correctly connected to the positive and negative ends of the laser.) 3. After the power supply is cut off, there is still residual voltage inside the power supply and on the laser. If you need to touch the electrodes of the laser, first use a grounded wire to touch the positive pole to discharge the residual voltage. (The high-voltage output terminal must meet the insulation safety requirement of 50KV high voltage to ground.) 4. The power supply must use a three-hole socket with a grounding terminal. The casing must be strictly grounded! To avoid electric shock. Features
1. Zero-current half-bridge soft-switching circuit. High efficiency, fast response, matching various laser tubes. 2. Simple port control, TTL level signal can control the start/stop of the laser. 3. The protection switch is to check the outdoor water, ventilation, etc. 4. Laser power adjustment: input 0V to 5V analog signal, or PWM signal. 5. Open circuit protection function: avoid damage to the laser power supply due to the burst of the laser tube. 6. Factory aging test: 1) Each power supply must undergo a 12-hour aging test at 60°C under full load. 2) 500 7-second start/stop tests. 2. Main Technical Parameters
3. Product Features & Advantages3.1 Ultra-Stable Laser OutputAdopts high-quality industrial switching power supply chips with extremely low output ripple. The current and voltage output remain stable even under long-time continuous working conditions. Effectively prevents laser power jitter, unstable light spot, and laser tube aging, greatly extending the service life of the laser tube and ensuring consistent cutting and engraving effect every time. 3.2 Full Safety Protection DesignBuilt-in multiple automatic protection systems. Once abnormal conditions such as short circuit, overheating, over current, over voltage or water shortage occur, the power supply will automatically cut off the high voltage output and trigger alarm indicator light. It effectively protects the laser tube, machine equipment, and operator safety, providing reliable guarantee for long-term industrial use. 3.3 High Compatibility with All Main Control SystemsSupports mainstream control signals including 0–5V, 0–10V analog quantity and PWM signal. Fully compatible with Ruida, DSP, MCH and other mainstream laser controller systems. Plug and play, no extra conversion module required. Suitable for all brands of laser cutting and engraving machines. 3.4 Excellent Heat Dissipation for Long-Time Continuous WorkEquipped with high-density heat dissipation fins and large silent cooling fans. The heat dissipation structure is optimized for dust-proof and high-temperature resistance. The power supply can work continuously 24 hours under full load, suitable for factory batch processing and long-time industrial production. 4.Daily Maintenance & TroubleshootingRegularly clean dust on the cooling fan and heat sink to ensure good heat dissipation. Check whether the wiring terminals are loose or aging regularly. If the power supply has no output, alarm light flashes or power is insufficient, please check the input power, cooling system, control signal and laser tube status first. Cut off the power immediately when abnormal failure occurs. Do not work with faults. 5. After-Sales ServiceWe provide 12 months warranty for this laser power supply. Free maintenance and replacement for quality problems within the warranty period. Professional technical support and installation guidance are provided all the time. Custom voltage and special interface requirements are acceptable. |
